Lexus ISXE30

Before you choose wheels.

A good-looking setup is only useful if the details match your car. Start with these generation-specific checks.

1. Record exact trim, drivetrain and brake equipment rather than treating every XE30 as identical.
2. Separate rear- and all-wheel-drive variants where applicable and record front/rear tire dimensions.
3. Identify brake package, ride height and suspension changes before comparing the wheel face or fender gap.

Record the complete setup.

Track front and rear separately, even on a square setup. Wheel diameter and width alone cannot establish clearance.

Wheels

Exact brand and model, diameter × width, nominal offset, bolt pattern and hub bore.

Spacers

Explicit front and rear thickness in millimeters. Enter zero only after confirming there are no spacers.

Tires

Brand, model and full size on each axle. Nominal sizes do not guarantee the same measured section width.

The car

Market, model year, trim, body style, brake package, suspension, alignment and any fender modifications.

Real-world result

Rubbing at steering lock, under compression and with passengers or cargo. Include conditions, not just “fits.”